22/09/19
How to improve the working efficiency of stainless steel water pump
During the use of the stainless steel water pump, its bearings will also be worn, so in order to make it run more lubricated, it is also necessary to replace the lubricating oil required by the stainless steel pump in time. Generally speaking,
During the use of the stainless steel water pump, its bearings will also be worn, so in order to make it run more lubricated, it is also necessary to replace the lubricating oil required by the stainless steel pump in time. Generally speaking, when the stainless steel pump is used, its replacement frequency should be controlled at about 100 hours, and then it can be replaced slightly later. For example, replacement can also be performed after 500 hours of operation. But here I want to remind you that you also need to pay special attention to the temperature of the bearing during use. In general, the temperature should not exceed 35 degrees Celsius of the ambient temperature, which is also to avoid damage to the bearing due to excessive temperature.
Other information
Need help?
Monday - Friday:8am - 5pm
Saturday:10am - 2pm
Monday - Friday:
8am - 5pm
Saturday:
10am - 2pm
